Blending

Status
Not open for further replies.

BKtx

Member
Joined
Mar 15, 2014
Messages
22
Points
3
Location
West Texas /Permian Basin
Just wanted to mention the casing I use are WLTs. I don't believe I could achieve the better attributes of any blend without that casing. I buy all three types and mix and match,the only one I don't switch around is the flue cured casing,apply it to my red and a mix of the other two types on my burley and a little of the general purpose over the whole batch. Good Luck!
 

DGBAMA

Well-Known Member
Joined
Feb 10, 2013
Messages
4,418
Points
63
Location
NORTH ALABAMA
BK, 5-10% fire cured makes a nice addition if you like a full flavored smoke. Start low, it is easy to overdo. If you like any food cooked on a smoker, you should try it.
 

CT Tobaccoman

Well-Known Member
Joined
Jun 28, 2014
Messages
464
Points
28
Location
Southern New England
Isn't the WLT light air cured very much like burley? It smells and looks nearly identical. I'll probably use it instead of burley next time I made up a batch.

Gotta say the casings make a big improvement in the smoothness of the smoke. I use the one for flue cured on the whole blend, which is half various flue cure (mostly red,) 1/4 burley and 1/8 each of oriental and Maryland, roughly. Finally, I don't feel the need to buy Marlboros any more, and I smoke noticeably fewer cigarettes in a day, and don't feel the craving much at all. A cigarette is more satisfying now and the need for the next one is less.
 

jwit76

Well-Known Member
Joined
Jul 11, 2014
Messages
54
Points
0
"Finally, I don't feel the need to buy Marlboros any more, and I smoke noticeably fewer cigarettes in a day, and don't feel the craving much at all. A cigarette is more satisfying now and the need for the next one is less."

A sincere congrats on that, it is truly an accomplishment and exactly what I'm going for as well. I still find myself enjoying some Winstons and Marlboros throughout the week, so I know I'm not there yet. I've been doing a lot of experimenting and now I'm hoping to narrow things down. I've tried steaming, I've tried toasting, experimented with WLT's various casings, made my own casings, experimented with different tubes, etc, etc. I discovering that sometimes simpler is better.
 

DGBAMA

Well-Known Member
Joined
Feb 10, 2013
Messages
4,418
Points
63
Location
NORTH ALABAMA
Getting over the mind set of wanting to duplicate an old favorite is the hardest part of whole leaf. Different is a good thing, as long as the satisfaction is equal or better. We smoked a particular brand because our habit told us to, not because it was better than any other.
 

CT Tobaccoman

Well-Known Member
Joined
Jun 28, 2014
Messages
464
Points
28
Location
Southern New England
Getting over the mind set of wanting to duplicate an old favorite is the hardest part of whole leaf. Different is a good thing, as long as the satisfaction is equal or better. We smoked a particular brand because our habit told us to, not because it was better than any other.

I agree. The thing is to become accustomed to better cigarettes than the commercial products. What Marlboro and Winston have that we don't have is RST--Reconstituted Sheet Tobacco, and we are better off without that sort of garbage.
 

Mad Oshea

Taking a break
Joined
Sep 30, 2013
Messages
1,863
Points
0
Location
Albuquerque New Mexico (USA)
Part of the comercial addiction, is the addictive addatives they put in, and the lazy part of not rolling. Easy is not good for good folks. Just pay and Your done. The cigarettes I roll last three times the store bought. And that means I get three for one, that is better. Mad- Cigars, pipe, and snus are the same.
 

jwit76

Well-Known Member
Joined
Jul 11, 2014
Messages
54
Points
0
What a labor of love when you don't have the most efficient tools. Shredded a gallon bag of Maryland and red leaf. Rolled cigar style, sliced super thin with a hand sharpened japanese kitchen knife, then scissor chopped the baccy to produce a commercial looking shag. Hoping to pick up Don's upcoming shredder (or some shredder) to save a lot of time. Gonna shred the remaining bright, prilep and first priming and I'm expecting some good results. Experimenting with my own casings after reviewing ingredients on Philip Morris and rj reynolds. Still keeping some marlboro reds and winstons around the house, but those days will end once I get this baccy dialed in.
 

jwit76

Well-Known Member
Joined
Jul 11, 2014
Messages
54
Points
0
Marlboro reds = most engineered, Winston reds = Baccy and water, hoping to fall somewhere inbetween.
 

Freeotatv

Well-Known Member
Joined
Sep 14, 2014
Messages
206
Points
18
Location
Ga
Man..a gallon bag hand shag cut is a lotta love..i did that for a month and then bought the powermatic.

anyway..ive been experimenting with casings and just landed a fairly good recipe ...i just posted it in the casings forum if you are interested. With some comments about marinate time and glycerin impact...
 

jwit76

Well-Known Member
Joined
Jul 11, 2014
Messages
54
Points
0
I'll check it out for sure, I appreciate it. Now that I have the shag down, it's all down to casings and blend proportions.
 

Freeotatv

Well-Known Member
Joined
Sep 14, 2014
Messages
206
Points
18
Location
Ga
Yup...i read some of your earlier postings..so i think we both spent a lot of time researching casings....

The recipe i just posted is a result of five diff recipes and each attempt yielded a lesson which had me mod the recipe each time.

Post into the casing thread after you try it a bit or wana dicuss a bit more....id be interested on your results etc....i dont think this recipe is a final version..but a decent start...
 

jwit76

Well-Known Member
Joined
Jul 11, 2014
Messages
54
Points
0
Will do, I've already written it down, sounds tasty. I'll report out later. As I research the science of big tobacco, one of the primary factors that I've been contemplating is that aside from all the engineering in the chemistry dept, they start with leaf that's already been aged at least 2 - 3 years. That and the quality of their tubes that aren't accessible to the public.
 

jwit76

Well-Known Member
Joined
Jul 11, 2014
Messages
54
Points
0
Started out hand rolling with RAW papers, then tried out about 10 different tubes, landed on Premiere for now.
 

Freeotatv

Well-Known Member
Joined
Sep 14, 2014
Messages
206
Points
18
Location
Ga
I handroll with raw classic...tried their hemp but i found the hemp version added a taste i didnt prefer.

the 4 pack of 300 raw classics rounds out to a penny a sheet which is nice...just took a while to figure out how to roll well with the raws...the thinness and length take a bit getting used to.
curious on why you switched to tubes..that requires buying a stuffing machine.
 

jwit76

Well-Known Member
Joined
Jul 11, 2014
Messages
54
Points
0
I still have the papers on hand, but originally I went with the papers and organic cotton filters, so offered by raw. I was dissatisfied with the draw, which some of the other reviewers on amazon had mentioned as well. At that point I switched to tubes and a cheap $7 injector and it was a completely different smoke, I was amazed. I wouldn't mind giving the papers another go around, but I'm planning to pick up the manual powermatic injector which should make life much easier.
 
Status
Not open for further replies.
Top