Dry leaves

Status
Not open for further replies.

Kikiri

Well-Known Member
Joined
Oct 21, 2020
Messages
59
Points
33
Location
Curaçao
I have just received a box with LO leaves that they apparently left abandoned on a cruise ship, sadly they are extremely dry, which they suggest I do especially with the filling, they look like cookies, do they have salvation?
 

MarcL

Well-Known Member
Joined
Mar 11, 2013
Messages
4,413
Points
113
Location
Central Maryland
Bob is correct. This is elementary. I can only imagine that your location must have something to do with it because, shipping dry leaf is a bad practice. Though, you are not alone in this experience I have seen with LO.
I just did this yesterday with an opened bag of Prilep that went overlooked in storage. Some loss is inevitable. That is if powder is not in your wheel house for utilization.
 

Kikiri

Well-Known Member
Joined
Oct 21, 2020
Messages
59
Points
33
Location
Curaçao
What I think happened was that the buyers never showed up and on the ship they didn't know how to keep it well, in fact they were going to dump it ,,, they are fillers from Honduras and two Secos (olor and criollo) ,,, but I will do what They recommend me to see if I can save them ,,, thank you
 

MarcL

Well-Known Member
Joined
Mar 11, 2013
Messages
4,413
Points
113
Location
Central Maryland
https://i.imgur.com/jFnQWcY.jpg
 

MarcL

Well-Known Member
Joined
Mar 11, 2013
Messages
4,413
Points
113
Location
Central Maryland
Marc,
How long can leaves be stored like this? I'm doing that with my overstock right now.

Thanks,

Cheers
It seems like forever when conditions are right? That Prilep is from wlt and came in good condition but, was overlooked in my part. It became dry to the bone by the time I got to it. I'll say I over cased it (as usual) for some time to enable penetration. Then cased it down before sealing it. The air was not vacuumed out entirely. I do this in a tub and change the air with some frequency. The leaf that I use with some frequency is in a wlt bag (side split) then in a ziploc then in kind of larger/heavier mil plastic grosser bag then in a tub. A lot of the unopened wlt bags have kept for a good while. the ones that do not have leaked for some reason. yesterday I visited my leaf that I use with some frequency after some several weeks kept really well. Having to revisit storage keeps us from loss to crumbling. My storage space is in my living space. conditioned.
 

GWLee

Well-Known Member
Joined
Nov 14, 2020
Messages
101
Points
43
Location
Woodbridge, VA
It seems like forever when conditions are right? That Prilep is from wlt and came in good condition but, was overlooked in my part. It became dry to the bone by the time I got to it. I'll say I over cased it (as usual) for some time to enable penetration. Then cased it down before sealing it. The air was not vacuumed out entirely. I do this in a tub and change the air with some frequency. The leaf that I use with some frequency is in a wlt bag (side split) then in a ziploc then in kind of larger/heavier mil plastic grosser bag then in a tub. A lot of the unopened wlt bags have kept for a good while. the ones that do not have leaked for some reason. yesterday I visited my leaf that I use with some frequency after some several weeks kept really well. Having to revisit storage keeps us from loss to crumbling. My storage space is in my living space. conditioned.
Sounds very close to how I am doing things, except casing before sealing. Yeah, the bag leaking is what I am trying to get ahead of. I know that folks try their darnedest to ensure we get the optimum leaf, but things happen and it could occur in packaging, shipping or here at the end. Instead of casing it prior to sealing, would rather vac seal and then rehydrate after opening, getting leery of the mold that keeps popping up. And my storage area/workplace is in the basement, so the environment is fairly regulated, but am running out of space and have to see what I can store in my "rent a shed." However temps soar up to 90-100+ during the summer and humidity is whatever the ambient humidity is, but with the sealed bags, that should haven't an impact, the heat is what I am concerned about. Like I said, I have to see what I can move out of my workplace so I can get back to my leatherwork, have numerous orders on hold till I stop playing with the tobacco. lol

Thanks!

Cheers
 

MarcL

Well-Known Member
Joined
Mar 11, 2013
Messages
4,413
Points
113
Location
Central Maryland
Sounds very close to how I am doing things, except casing before sealing. Yeah, the bag leaking is what I am trying to get ahead of. I know that folks try their darnedest to ensure we get the optimum leaf, but things happen and it could occur in packaging, shipping or here at the end. Instead of casing it prior to sealing, would rather vac seal and then rehydrate after opening, getting leery of the mold that keeps popping up. And my storage area/workplace is in the basement, so the environment is fairly regulated, but am running out of space and have to see what I can store in my "rent a shed." However temps soar up to 90-100+ during the summer and humidity is whatever the ambient humidity is, but with the sealed bags, that should haven't an impact, the heat is what I am concerned about. Like I said, I have to see what I can move out of my workplace so I can get back to my leatherwork, have numerous orders on hold till I stop playing with the tobacco. lol

Thanks!

Cheers
I was able to create mold on tobacco by doing what sounds similar to what your about to do. We are better off storing dry leaf. I believe wlt does limit leaf casing for shipping for that reason. I think its safe to say that there is a limited amount of attentiveness we give to the leaf that the leaf can tolerate. Knowing what that means is a hands on thing. ... its not rocket science but, neither is rocket science if you know what I mean.
 
Status
Not open for further replies.
Top