I'm back! @LarMoeCur

Status
Not open for further replies.

LarMoeCur

Member
Joined
Mar 13, 2017
Messages
13
Points
13
Hello all,

I had to take a break from my cigar rolling adventures. Long story short, I retired from the Navy, took a new job, had to uproot the entire family and move from Texas to Nevada. So, three years later, I found a bundle of my rolled cigars in the back of my humidor. I smoked one last weekend. WOW! What 3 years of aging will do for my cigars. It was really good. I promptly dug out my rolling equipment from the garage. Only to be greeted with sad news. The wooden molds I made have warped beyond repair. The second stinging blow is that SWMBO threw out my blending notes during the moving process. I feel like I'm right back to square one.

Putting in a tobacco order this weekend. I will say the shelves looks a little low on inventory from three years ago. Not nearly as many choices right now, the good news is I like full flavor and there is Nicaraguan tobacco in stock. No molds in the sizes I like either. Well, back to the mold building drawing board. I'll keep y'all posted on my progress.

Looking forward to picking your brains for blends and techniques.
 

LarMoeCur

Member
Joined
Mar 13, 2017
Messages
13
Points
13
A little something I've been working on waiting for my tobacco to arrive. I've always loved box pressed cigars. Time to give rolling some a try.
 

Attachments

  • 20220618_092848.jpg
    20220618_092848.jpg
    277.7 KB · Views: 7
  • 20220618_092924.jpg
    20220618_092924.jpg
    284.8 KB · Views: 7
  • 20220618_092931.jpg
    20220618_092931.jpg
    301.8 KB · Views: 7

LarMoeCur

Member
Joined
Mar 13, 2017
Messages
13
Points
13
Nice I have the same 3D printer. Is that a file you made or is it out there to be able to download?
FrostD,

The round 54X4 mold is on Thingiverse. I modified that .stl into a box pressed 54x7 mold. I haven't used it yet nor do I have much rolling experience. So if it's going to be a good mold I can't tell you as of right now. I've already identified some changes that need to be made. My first printed top was super snug. So snug, I had to sand it quite a bit just to get it to fit. I tweaked it .25mm and the second top fits like a glove. I didn't take enough time to think before the second print. I should have changed the amount of compression at the sametime. If you look at the pictures the cigar will be rectangular (which box pressed are) but I think the compression is a few mm more than I would like. Once I get a good working version that I like, I'll post the .stl file.

I'm also working on a box pressed torpedo version.
 

FrostD

Well-Known Member
Joined
Dec 29, 2020
Messages
787
Points
93
Location
Wisconsin
FrostD,

The round 54X4 mold is on Thingiverse. I modified that .stl into a box pressed 54x7 mold. I haven't used it yet nor do I have much rolling experience. So if it's going to be a good mold I can't tell you as of right now. I've already identified some changes that need to be made. My first printed top was super snug. So snug, I had to sand it quite a bit just to get it to fit. I tweaked it .25mm and the second top fits like a glove. I didn't take enough time to think before the second print. I should have changed the amount of compression at the sametime. If you look at the pictures the cigar will be rectangular (which box pressed are) but I think the compression is a few mm more than I would like. Once I get a good working version that I like, I'll post the .stl file.

I'm also working on a box pressed torpedo version.
Outstanding! I dig it! Would be interested in testing out as well (if your willing to share). I’ve 3D printed a few, in addition to buying regular molds. The 3D printed ones I believe can work very well, but the few I’ve printed, I’ve had issues with the bottom layers staying down. They’ve been peeling up, so I’ve considered a glass bed for it or exploring the use of hair spray to keep it down. However, hair spray + 3D printer, doesn’t sound like a good combo to me. I do have an auto bed leveler attachment that is installed, but haven’t utilized it as of yet.
 

LarMoeCur

Member
Joined
Mar 13, 2017
Messages
13
Points
13
Outstanding! I dig it! Would be interested in testing out as well (if your willing to share). I’ve 3D printed a few, in addition to buying regular molds. The 3D printed ones I believe can work very well, but the few I’ve printed, I’ve had issues with the bottom layers staying down. They’ve been peeling up, so I’ve considered a glass bed for it or exploring the use of hair spray to keep it down. However, hair spray + 3D printer, doesn’t sound like a good combo to me. I do have an auto bed leveler attachment that is installed, but haven’t utilized it as of yet.
I run a glass bed. Hair spray is quite common. I use an Elmer's glue stick to aid in bed adhesion. The first print I didn't use any glue and I didn't run the bed hot enough (50c needed to be 55c). I had one corner warp just a little bit. The good news is, it didn't affect the interior floor so the mold will work just fine. Although, I am worried about the texture of the mold. I may have to either sand it just a little or try to run a little more fill or maybe a touch of wax or ABS filament. I've got options, but I will not be sure until my tobacco gets here and I roll a few.

I will keep y'all posted on the results.
 
Status
Not open for further replies.
Top