Returning member: @OwlHoot

OwlHoot

Member
Joined
May 23, 2022
Messages
5
Points
3
Location
Devon, UK
Back after a hiatus of a couple of years.

Decided to have another go at growing my own baccy, now a pack of cigarettes is £20 in the UK (where I'm based) i.e. well over $20, which is an outright mick take!

On my first attempt, I managed to grow quite a respectable crop, but found that growing was the easy part. The tricky part is curing it, because when I hung my precious leaves up in a cool room they nearly all went moldy! So the big question here is can one cure tobacco in a normal electric oven, perhaps with a bowl of water to maintain humidity? If so what temperature and time should I set? I'm very much hoping the answer is yes, but will concede that the idea may be ridiculous!

Also, interested in recommendations for a fine shredder. The one I bought on Amazon was something like a pair of interlocking cylinders, but the resulting shreds were way to broad to make decent cigarette baccy, and as often as not the damned thing jammed and left half the leaves stuck between the blades.

Finally (and maybe I'm jumping the gun a bit here, not having yet mastered curing or shredding) I'd be very interested in info on nitrogen/vacuum sealed packing, or long-term storage

Anyway, I look forward to conversing with you baccy experts and novices alike, and who knows in due course I may move from the latter category to the former! :)

Cheers John (Ramsden)
 

Old Gasman

Well-Known Member
Joined
Feb 28, 2022
Messages
497
Points
93
Location
Norfolk (U.K not Virginia)
It's perfectly feasible in the absence of a kiln to cure and age your tobacco using nothing other than time and patience. You need to get your leaves into the correct "case" then simply store them away in a bag. The trick is to try to keep the humidity level constant. Too dry and it doesn't age, to damp and it's mouldy. Just a cheap hydrometer from eBay will help with that.
 

Skafidr

Well-Known Member
Joined
Jul 3, 2024
Messages
191
Points
93
Location
South-Shore of Montreal, QC, Canada
because when I hung my precious leaves up in a cool room they nearly all went moldy

This can happen if the RH is too high and/or there is not enough ventilation; higher humidity pockets can form where air doesn't flow enough. If you manage to spot mould early enough, and depending on where it occurs on the leaf, you can just remove the mouldy part and use the rest of the leaf.

Good luck with this season's batch!
 
Last edited:
Top