Blending

Status
Not open for further replies.

Freeotatv

Well-Known Member
Joined
Sep 14, 2014
Messages
206
Points
18
Location
Ga
Just a sugestion..try the handroll with no filter...

if rolled correctly it will offer the perfect draw and no expense or fiddling with filter during the roll.
 

BarG

Founding Member
Joined
Jun 23, 2011
Messages
5,120
Points
113
Location
Texas, Brazos Vally
I never try to match my blends with commercial. Nor do I try to duplicate it from month to month. I add basic ingrediants,
Flue cured, Burley, oriental , Maryland 609 + any of a number of different varietys, depending on what I have aged or kilned.
 

jwit76

Well-Known Member
Joined
Jul 11, 2014
Messages
54
Points
0
I agree that trying to "match" the taste of a commercial brand is not the objective, but rather creating something superior due to the nature of its purity and conditioning our tastebuds to appreciate the difference. I do however respect the depth of research and engineering that is employed commercially and still believe there are factors that can be borrowed by the whole leaf connoisseur. As I continue to learn via outside articles and threads on this forum, the factor of aging tobacco seems to be more important than any casing, etc in determining final taste. Perhaps that's why many of you kiln as is seems to be a method of accelerating aging correct?
 

leverhead

Well-Known Member
Joined
Jan 16, 2012
Messages
3,204
Points
83
Location
Grimes County Texas
I agree that trying to "match" the taste of a commercial brand is not the objective, but rather creating something superior due to the nature of its purity and conditioning our tastebuds to appreciate the difference. I do however respect the depth of research and engineering that is employed commercially and still believe there are factors that can be borrowed by the whole leaf connoisseur. As I continue to learn via outside articles and threads on this forum, the factor of aging tobacco seems to be more important than any casing, etc in determining final taste. Perhaps that's why many of you kiln as is seems to be a method of accelerating aging correct?

Kilning/artificial aging works wonders for the smoking qualities of tobacco. To me, a kiln is right up there with a rototiller for growing tobacco.

Making thousands of uniform tasting cigarettes isn't that difficult, once you find a blend that works for you. The quantities of leaf are small and can be from a single source. If you change the numbers to millions or billions, that would be harder to do without adding some flavors from a controllable source (casings). They don't have to be good or bad, they just make it easier to make a uniform product in tons and years rather than pounds and months. I tried using casings when I started using whole leaf, with mixed results. I made better progress blending leaves for flavor and didn't really miss what casings could do. At the time there were enough other problems to solve, handling, shredding, getting a good burn rate, growing it and working in my spare time.

Of the commercial information available, handling and shredding was the most useful. The blend ratios didn't work very well without the casings. I get the most compliments from the few pounds a year of Maryland and Turkish tobacco in my blends.
 

jwit76

Well-Known Member
Joined
Jul 11, 2014
Messages
54
Points
0
Thanks for the insightful feedback there leverhead, there's a lot to consider there. At some point I would like to step up to growing my own plants, but at this point I'll be continuing to buy WLT. Is Kilning something that would be desirable for an already cured leaf such as what you would get from Don?

Interesting comments about casing, I notice more of you placing much less significance on casings the more advanced you become with blending.
 

Freeotatv

Well-Known Member
Joined
Sep 14, 2014
Messages
206
Points
18
Location
Ga
Dons leaf is already aged and cured and arrives ready for processing/cutting and blending.

Most of his leaves detail year of crop....ie 2012 dark air.

If you click onto a given leaf...he usually has more details about that leaf and probably the crop gear.

If not...i would call or email him to inquire about crop gear.

It would a personal preference jf you want to age it longer....

I would just keep an eye on it to check for mold.

Theres a forum about long term storage...cardboard boxes seem to be popular.

Its probably bc the cardboard will tend to a absorb excess moisture before it hits the leaf....
 

jwit76

Well-Known Member
Joined
Jul 11, 2014
Messages
54
Points
0
I knew his leaf was cured, but I didn't even consider how long they were aged. I'd love to know. The Dark Air states that it's a 2012 crop, but other than that I didn't see any age specs. I might shoot him an email out of sheer curiosity. Interesting regarding the cardboard boxes.
 

CT Tobaccoman

Well-Known Member
Joined
Jun 28, 2014
Messages
464
Points
28
Location
Southern New England
Marlboro reds = most engineered, Winston reds = Baccy and water, hoping to fall somewhere inbetween.

I read recently that Winston is among those that contain the most amount of reconstituted sheet tobacco. I learned also from a post elsewhere on the forum that Marlboro contains a substantial amount of RST made form VA flue cured.

I would swear that Marlboro has some sort of addictive substance. With Marlboros I feel the need for another one every 20 minutes. With my blend, which I like very much, one an hour is enough, and if I can smoke a cigar I don't desire a cigarette for a couple hours. I am convinced that commercial cigarettes are addictive poison and I hope to break the habit of buying them, if only a pack a week.

We have all made a decision to bypass Big Tobacco and we have the possibility of making any sort of blend. Although I still haven't quite succeeded, the idea is to quit buying packs of cigarettes and never look back. We can make far better cigarettes that contain far fewer dangerous additives. We have all the tobacco and even casings, which I have found useful in mellowing the harshness of raw tobacco. Say good-bye forever to Philip Morris, RJR, Lorrilard, American, BAT and all their subsidiaries.

CT
 

deluxestogie

Administrator
Staff member
Joined
May 25, 2011
Messages
26,609
Points
113
Location
near Blacksburg, VA
Is Kilning something that would be desirable for an already cured leaf such as what you would get from Don?
Kilning any leaf for a month will bring about some change. For WLT cigar leaf, you probably couldn't notice the difference. With WLT flue-cured varieties, a month in the kiln will darken it a bit, and smooth it a bit--but it's mostly noticeable by the slight color change. Flue-cured leaf does not age rapidly, regardless of the conditions, since its primary oxidase enzyme has been denatured by the flue-curing process.

For air-cured leaf that's straight out of the color-curing shed, whether it's for cigars or cigarettes, a month's stay in a kiln brings about dramatic changes--the equivalent of that crucial, initial year of natural aging. (I think it's more like 2 years of aging, since the enzymatic changes are brought nearly to completion.)

SUMMARY: You need a kiln for fresh leaf. Don't bother with a kiln for leaf from WLT.

Bob
 

leverhead

Well-Known Member
Joined
Jan 16, 2012
Messages
3,204
Points
83
Location
Grimes County Texas
Thanks for the insightful feedback there leverhead, there's a lot to consider there. At some point I would like to step up to growing my own plants, but at this point I'll be continuing to buy WLT. Is Kilning something that would be desirable for an already cured leaf such as what you would get from Don?

Interesting comments about casing, I notice more of you placing much less significance on casings the more advanced you become with blending.

Growing a dozen or two plants of a Turkish variety doesn't take too much space or time. Ottoman or Bursa are productive plants that give a good tobacco that would be hard to buy. Curing can be a PIA depending on your weather, you should add your location to your profile. A few words of caution, growing your own is more addictive than smoking it. There are too many varieties to try them all, but you'll want to.

You can put anything into a kiln, whether or not you'll like what comes out is a matter of taste and trouble. I haven't bought much leaf lately, what I have bought is fine the way I get it.

I don't know if I'm more advanced or that I just had to get used to the flavors available in non-cased tobacco, it is different. I started out with a flue-cured base that I could smoke all by itself, at the time it was a blend of flue-cured. From there, I started adding other types of tobacco, about 5% at a time. I would make up enough for about a pack of cigarettes, 18-20 grams. Smoking normally, by the end of the pack, I could tell if I had too much or to little. After a month, I had two good day to day blends. My wife's blend is a timid flue-cured and Turkish and mine has Maryland and dark air-cured mixed into her blend. Time has changed the leaf and the sources, a little tweaking sets everything right.
 

Freeotatv

Well-Known Member
Joined
Sep 14, 2014
Messages
206
Points
18
Location
Ga
Well said......

Here a thought on the next blend session.

Case only dark air....i think flue cured va types..md609 and turkish dont need casing.

Dark air has a bit of a bite

Ill report back on this...will probably happen later this week...
 

Freeotatv

Well-Known Member
Joined
Sep 14, 2014
Messages
206
Points
18
Location
Ga
Agreed..latest blend is red va/bright va/md609/ prilep.

Im also gona try this without casing...it is probably fine without it.

I make 30 gram batches at a time as well...

Levehead...curious..would you share your 2 daily blends....
 

leverhead

Well-Known Member
Joined
Jan 16, 2012
Messages
3,204
Points
83
Location
Grimes County Texas
Agreed..latest blend is red va/bright va/md609/ prilep.

Im also gona try this without casing...it is probably fine without it.

I make 30 gram batches at a time as well...

Levehead...curious..would you share your 2 daily blends....

Yes I would, I'll have to figure out what they are now. It's all home grown, so your mileage may vary. At the end of the season last year, I put use quantities of leaf into hands. I don't remember the weights now, I know that I've posted them before in a similar thread.

Now I cut two pounds at a time.
 

jwit76

Well-Known Member
Joined
Jul 11, 2014
Messages
54
Points
0
A few words of caution, growing your own is more addictive than smoking it. There are too many varieties to try them all, but you'll want to.

I figured it might be addicting, I'll be looking forward to getting into it when life allows. I've lived in the great tobacco state of NC for last 4 yrs, but I originally come from MI.


I don't know if I'm more advanced or that I just had to get used to the flavors available in non-cased tobacco, it is different. I started out with a flue-cured base that I could smoke all by itself, at the time it was a blend of flue-cured. From there, I started adding other types of tobacco, about 5% at a time. I would make up enough for about a pack of cigarettes, 18-20 grams. Smoking normally, by the end of the pack, I could tell if I had too much or to little. After a month, I had two good day to day blends. My wife's blend is a timid flue-cured and Turkish and mine has Maryland and dark air-cured mixed into her blend. Time has changed the leaf and the sources, a little tweaking sets everything right.

This is also very helpful info for me at this stage. I was wondering how to practically go about blending proportions and actually keeping track of the results. Adding a little baccy 5% at a time makes a lot of sense, much easier to keep track of I would think. I might also need to come up with a milder blend for the wife, my taste is full flavor all the way, whether it be my cigs or cigar. The pipe I still enjoy aromatics simply for the taste.
 
Last edited by a moderator:

leverhead

Well-Known Member
Joined
Jan 16, 2012
Messages
3,204
Points
83
Location
Grimes County Texas
...I was wondering how to practically go about blending proportions and actually keeping track of the results. Adding a little baccy 5% at a time makes a lot of sense, much easier to keep track of I would think. I might also need to come up with a milder blend for the wife, my taste is full flavor all the way, whether it be my cigs or cigar. The pipe I still enjoy aromatics simply for the taste.

I guess old school would be ounces per pound, one ounce is 6.25% of a pound. I like percentages, but I use parts also. Either way is fussy enough for tobacco blending. If you roll your own cigars, shred some of your scrap, you might find something interesting.

This is what I have made for my wife over the last couple of years and how it has changed. The first column is from after the 2012 growing season. The flue-cured was a mix of purchaced and my own, the Ottoman and samsun were home grown. The second column is what I make now, it's all home grown. After the 2013 season I had better supplies of Turkish and it makes a blend that she doesn't complain about. The last column is an example of how I would do a small change up. The WLT Izmir are small leaves with quite a bit of flavor, so a small amount makes a nice difference.

Flue-Cured.......85% 77% 77%
Ottoman..........12% 13% 13%
Bursa................--- 10% 5%
Izmir.................--- --- 5%
Samsun............3% --- ---

This is what my blend has looked like at the same time. The first column is from late 2012, the last time I used Burley. I got tired of fighting with it. The Samsun went away at about the same
time. For me, neither one brought enough to the party to bother with. The second column is what I make now, the percentages are rounded off and aren't really that fussy. The numbers come out a little weird because of the way I make it up. I shred her blend and take my split. Then I shred the Maryland and dark air-cured in a 2:1 ratio and add it to my split of her blend, 9 parts her blend to 1 part of the Maryland/dark air-cured.


Flue-Cured.........73% 69%
Burley.................7% ---
Dark Air-Cured......3% 3%
Maryland.............2% 7%
Ottoman............12% 12%
Bursa.................--- 9%
Samsun..............3% ---

The tables looked OK in the preview, I hope you can sort them out.
 
Status
Not open for further replies.
Top