I agree that trying to "match" the taste of a commercial brand is not the objective, but rather creating something superior due to the nature of its purity and conditioning our tastebuds to appreciate the difference. I do however respect the depth of research and engineering that is employed commercially and still believe there are factors that can be borrowed by the whole leaf connoisseur. As I continue to learn via outside articles and threads on this forum, the factor of aging tobacco seems to be more important than any casing, etc in determining final taste. Perhaps that's why many of you kiln as is seems to be a method of accelerating aging correct?
Marlboro reds = most engineered, Winston reds = Baccy and water, hoping to fall somewhere inbetween.
Kilning any leaf for a month will bring about some change. For WLT cigar leaf, you probably couldn't notice the difference. With WLT flue-cured varieties, a month in the kiln will darken it a bit, and smooth it a bit--but it's mostly noticeable by the slight color change. Flue-cured leaf does not age rapidly, regardless of the conditions, since its primary oxidase enzyme has been denatured by the flue-curing process.Is Kilning something that would be desirable for an already cured leaf such as what you would get from Don?
Thanks for the insightful feedback there leverhead, there's a lot to consider there. At some point I would like to step up to growing my own plants, but at this point I'll be continuing to buy WLT. Is Kilning something that would be desirable for an already cured leaf such as what you would get from Don?
Interesting comments about casing, I notice more of you placing much less significance on casings the more advanced you become with blending.
Case only dark air....Dark air has a bit of a bite...
Agreed..latest blend is red va/bright va/md609/ prilep.
Im also gona try this without casing...it is probably fine without it.
I make 30 gram batches at a time as well...
Levehead...curious..would you share your 2 daily blends....
A few words of caution, growing your own is more addictive than smoking it. There are too many varieties to try them all, but you'll want to.
I don't know if I'm more advanced or that I just had to get used to the flavors available in non-cased tobacco, it is different. I started out with a flue-cured base that I could smoke all by itself, at the time it was a blend of flue-cured. From there, I started adding other types of tobacco, about 5% at a time. I would make up enough for about a pack of cigarettes, 18-20 grams. Smoking normally, by the end of the pack, I could tell if I had too much or to little. After a month, I had two good day to day blends. My wife's blend is a timid flue-cured and Turkish and mine has Maryland and dark air-cured mixed into her blend. Time has changed the leaf and the sources, a little tweaking sets everything right.
...I was wondering how to practically go about blending proportions and actually keeping track of the results. Adding a little baccy 5% at a time makes a lot of sense, much easier to keep track of I would think. I might also need to come up with a milder blend for the wife, my taste is full flavor all the way, whether it be my cigs or cigar. The pipe I still enjoy aromatics simply for the taste.
We discuss any variety of tobacco, as well as numerous approaches to growing, harvesting, curing, and finishing your crop. Our members will attempt to provide experience-based answers to your questions.