OK, check my math here:
Per Jensen states that the automated press is 40 tons, 40x40cm
40cm = 15.7”.
15.7x15.7=246 sq"
1 ton = 2000 pounds.
40 ton = 80,000#
80,000 pound ÷ 246 sq" = 325 psi
Multiply 325(psi) times the surface area of your mold (in sq. inches) to get the pressure needed to replicate the Mac Baren automated press.
So, for a 4"x4" mold (16 sq.”) you would need 5,200 PSI or (5,200 ÷ 2000) you would need a press rated at 2.6 tons
I ran the numbers on the old 55t press and (guessing the platen at 18sq") I arrived at the same PSI rating.
The press that Bruck is using fits that bill: http://www.harborfreight.com/6-ton-a-frame-bench-shop-press-1666.html