First Attempt at Making Flake

Status
Not open for further replies.

Woodsroad

Well-Known Member
Joined
Dec 29, 2013
Messages
50
Points
8
So you think that using a 30 ton log splitter might be overkill?
 

Woodsroad

Well-Known Member
Joined
Dec 29, 2013
Messages
50
Points
8
jojjas , What kind of wood are you using for the mold, and do you think that it influences the tobacco?
 

Woodsroad

Well-Known Member
Joined
Dec 29, 2013
Messages
50
Points
8
I just use ordinary pine wood , i have not noticed any influences in the baccy

I'm asking because I'm thinking about pressing with different woods. like charred hickory or apple.
 

Woodsroad

Well-Known Member
Joined
Dec 29, 2013
Messages
50
Points
8
OK, check my math here:

Per Jensen states that the automated press is 40 tons, 40x40cm
40cm = 15.7”.
15.7x15.7=246 sq"
1 ton = 2000 pounds.
40 ton = 80,000#
80,000 pound ÷ 246 sq" = 325 psi

Multiply 325(psi) times the surface area of your mold (in sq. inches) to get the pressure needed to replicate the Mac Baren automated press.

So, for a 4"x4" mold (16 sq.”) you would need 5,200 PSI or (5,200 ÷ 2000) you would need a press rated at 2.6 tons

I ran the numbers on the old 55t press and (guessing the platen at 18sq") I arrived at the same PSI rating.

The press that Bruck is using fits that bill: http://www.harborfreight.com/6-ton-a-frame-bench-shop-press-1666.html
 

Bruck

Well-Known Member
Joined
Apr 28, 2014
Messages
164
Points
0
Location
Northern VA
There's something to be said for using LOW pressure. For my first attempt I used my 20 ton shop press. For a mold I used a stainless steel can. The puck came out all right but it was harder than concrete. NASA expressed some interest in it. They said it was the perfect heat shield material for their new space shuttle. They abandoned the idea when they realized the astronauts would be subject to second hand smoke upon re-entry.

LOL on the heat shield!
My puck was pretty solid, but upon slicing/crumbling, the flavor was pretty good! I used less pressure in my 2nd batch, and it came out looking a bit more like conventional flake.
 
Status
Not open for further replies.
Top